S5AV
|
Model S5AV |
Displacement cc |
Pressure cont. bar |
Pressure max. bar |
Speed max. rpm |
Speed min. rpm |
Flow max. lpm |
Power max. Kw |
Weight Kg |
|---|---|---|---|---|---|---|---|---|
| 32 | 0 min ÷ 32,00 max | 280 | 350 | 3150 | 500 | 100 | 46 | 19 |
| 45 | 0 min ÷ 43,30 max | 300 | 350 | 2700 | 500 | 117 | 57 | 20 |
| 50 | 0 min ÷ 49,65 max | 320 | 380 | 3000 | 500 | 149 | 79 | 30 |
| 63 | 0 min ÷ 63,98 max | 320 | 380 | 2500 | 500 | 160 | 85 | 31 |
| 75 | 0 min ÷ 75,00 max | 350 | 420 | 2250 | 500 | 195 | 113 | 42 |
| 93 | 0 min ÷ 93,76 max | 320 | 380 | 2100 | 500 | 220 | 121 | 44 |
Highlights
- S5AV series are a family of variable displacement axial piston pumps designed for operation in open circuit. These axial piston swash plate design units can be used both for mobile and industrial applications. A strong and proven rotating group allows the pumps to work at high continuous and peak pressure. The pump features patented piston sliders design, resulting in minimal leaks and high volumetric efficiency. Controls provide high accuracy and repeatability. S5AV pumps operate at low noise emission levels, meeting the requirements of today's demanding industrial applications
• High pressure axial piston pump in swash plate design suitable for open loop operation for demanding applications in mobile and industrial hydraulics
• High efficiency and long life
• Good suction at high drive speeds
• Robust and proven swash plate engine with high quality components and manufacturing processes
• Protected by patent leak poor piston slider with washer
• Large permissible axial and radial forces of the drive shaft through increased storage
• Minimum and maximum displacement limit
• Through drive for adding gear and axial piston pumps up to the same (Tandem 100%)
• Wide range of adjustments and controls with high accuracy and repeatability
Mounting Options
• SAE B 2-bolt
• SAE-C 2-hole
• SAE D 4-hole Drive shaft
• Cylindrical with DIN 6885
• Splined shaft DIN 5480
• Splined shaft SAE Through drive
(Per SAE J744)
• G2, G3
• SAE A, SAE B, C SAE
Adjustment & Controls
• CTP - constant pressure regulator
• TP + CLS - Load sensing control with pressure
• NC + PC - Power control with pressure
• NC + LS + TP3 - Load sensing with power regulator pressure cut me (LS signal pressure relief)
• NC + PI + PC - Power control with pressure cut-off and hydraulic stroke limiter
• PI + PC - Proportional control hydraulic pressure cut
 |
S5AV_catalogue.pdf (1.22 MB) |
|
|
S5AV_installation_and_commissioning_notes.pdf (473.52 KB) |